A heritage shopfront in Holborn starts with what survives on the building, however little that seems. We record it, draw it and design any new work from that evidence.
Please have keys to any meter cupboards and shutter housings to hand when we survey in Holborn, because what sits behind them can change the drawing.

What should you think about before commissioning heritage shopfronts in Holborn?
In a parade of matching period fronts in Holborn, your neighbours are the pattern book. If their pilasters or cornices survive, we'd copy those sizes so your unit rejoins the row.
Sun is hard on old paintwork and putty. For a south-facing period front in Holborn, we'd look at a traditional retractable blind, which shades the glass, protects the stock and brings back a useful feature.
If your Holborn unit sits in a Victorian parade, the old pilasters usually set the rhythm, so a new front should land on them and not run past them. Keep that line and even a modern frame looks as though it belongs.
Who approves heritage shopfronts in Holborn?
For heritage shopfronts at premises in the Holborn area, the deciding question in England is whether the building work materially affects the external appearance. If it does, planning permission is needed, while a true like-for-like replacement usually needs none. The council confirms the position for each site.
Planning and advert applications for Holborn premises normally go to London Borough of Camden. We check the position for your address at survey.
What is a realistic budget for heritage shopfronts in Holborn?
Allow £8,495 to £24,995 plus VAT for a typical frontage. Size and specification set most of that figure for heritage shopfronts, and the rest depends on what the survey finds on site.
| Town | Holborn |
|---|---|
| Area | Greater London |
| Postcode districts | WC1A, WC1R, WC1V, WC2B |
| Planning authority | London Borough of Camden |
| Building approval | Building Regulations (Approved Documents) |
| Distance from Great Barr | About 104 miles |
| Survey | Free for new work |
Does London Borough of Camden publish shopfront guidance?
Yes, Camden Planning Guidance: Design (Chapter 6: Shopfronts) (2021). It tells applicants what the council expects from new and altered shopfronts. A few of the things it asks for:
- Existing stall risers should be kept, and new ones should be at least 300mm high or reach the top of the pilaster base or door panel.
- Solid shutters are only acceptable in exceptional circumstances, and internal security measures are strongly encouraged.
- Uncoated shutters, galvanised steel, milled finishes and anodised aluminium are not acceptable finishes.
Questions about heritage shopfronts in Holborn
How much of my Holborn shopfront can be kept?
Usually more than it first appears. Decay tends to stay low on posts and doors, while the upper joinery is often sound and can stay.
What does a period survey of my Holborn shop involve?
We measure the front, photograph every detail and check the condition of timber, paint and glass. With your agreement, we may lift a small piece of later boarding to see what survives behind it.
How long will restoration take at my Holborn premises?
New joinery typically takes 8 to 14 weeks to make, then 1 to 3 weeks on site. The survey gives you a realistic programme, because repair-only jobs can take far less.
Does a new shopfront in the Holborn area need Building Regulations approval?
Assume yes until building control says otherwise. England has no like-for-like exemption, though registered installers can self-certify replacement windows and doors in non-dwellings. That route doesn't cover structural glass, curtain walling or revolving doors.
Do roller shutters need planning permission in the Holborn area?
Usually yes. Installing or replacing a security grill or shutter on a shopfront is expressly outside England's shop permitted development rights, so the only way to avoid an application is work that doesn't materially affect the appearance. Ask the council before ordering.