A closed shop should still look alive. For Holborn frontages, a perforated curtain and a lit display keep the window working long after you lock up.
We measure your Holborn opening in person, at a time agreed with you first, so the visit fits around your trading.

What makes perforated roller shutters work well on Holborn premises?
On premises with a recessed entrance, the shutter line needs careful thought. We usually bring it forward to the building line, or close the recess separately, so the doorway does not become a hiding place.
If the shutter has to run past a door or a side window, we check how the curtain lands on the threshold. A neat bottom rail and floor lock keep the entrance flush when the shutter is up.
If the pavement falls across your frontage, let the stallriser take up the slope and keep the glass line dead level. The eye reads the long horizontal, so Holborn premises on a slope look settled once that line is true.
How much should you set aside for perforated roller shutters in Holborn?
As a working budget, use £1,695 to £4,495 plus VAT per shutter. Your place inside that range for perforated roller shutters depends mostly on how much of the existing frontage can stay and how much has to be put right first.
Could perforated roller shutters in Holborn need planning permission?
England has no permitted development route for changing a shopfront. Part 7 Class A of the General Permitted Development Order 2015 excludes creating, altering or replacing one, and it allows no alterations at all on article 2(3) land. That leaves two outcomes for perforated roller shutters at premises in the Holborn area: a planning application, or work that doesn't materially affect the external appearance.
Planning and advert applications for Holborn premises normally go to London Borough of Camden. We check the position for your address at survey.
| Town | Holborn |
|---|---|
| Area | Greater London |
| Postcode districts | WC1A, WC1R, WC1V, WC2B |
| Planning authority | London Borough of Camden |
| Building approval | Building Regulations (Approved Documents) |
| Distance from Great Barr | About 104 miles |
| Survey | Free for new work |
Does London Borough of Camden publish shopfront guidance?
Yes, Camden Planning Guidance: Design (Chapter 6: Shopfronts) (2021). It tells applicants what the council expects from new and altered shopfronts. A few of the things it asks for:
- Existing stall risers should be kept, and new ones should be at least 300mm high or reach the top of the pilaster base or door panel.
- Solid shutters are only acceptable in exceptional circumstances, and internal security measures are strongly encouraged.
- Uncoated shutters, galvanised steel, milled finishes and anodised aluminium are not acceptable finishes.
Questions about perforated roller shutters in Holborn
Can one person open the shutter at my Holborn shop?
Yes. Powered shutters run at the turn of a key or a button press, and a manual override is available if the power fails. We show your staff both at handover.
How noisy is a shutter in Holborn premises?
A modern tubular motor is fairly quiet, and a well-set curtain only makes a low rumble. Heavier steel shutters and worn guides make more noise, which matters if there are flats above.
Can you fit an internal shutter on my Holborn premises?
Usually, yes. We check for ceiling space, a clear path behind the window and a solid fixing for the guides. Where space is tight, a slim box or a smaller display can make it work.
Does a new shopfront in the Holborn area need Building Regulations approval?
Assume yes until building control says otherwise. England has no like-for-like exemption, though registered installers can self-certify replacement windows and doors in non-dwellings. That route doesn't cover structural glass, curtain walling or revolving doors.
Do I need planning permission to change a shopfront in the Holborn area?
Usually yes, if the work materially affects the building's external appearance. England's shop permitted development rights exclude creating, altering or replacing a shopfront, so there is no shortcut. A true like-for-like replacement usually needs no application, and the council confirms the position.