Our quotation for illuminated signage in Hertfordshire is written, itemised and valid for 90 days. Nothing is ordered until you accept it, which gives you time to take it to a landlord, a partner or a board.
Openings are rarely square or level, so the survey for illuminated signage records diagonals, pavement fall and head height at several points. Those few millimetres decide whether the finished front sits true against the building.

What makes illuminated signage work well for premises in Hertfordshire?
Power often sets the layout. On a frontage near St Albans we trace where a supply can reach the sign without surface trunking, and we leave the drivers where they can be changed.
Colour temperature should match across a group. If you run premises at several addresses in Hertfordshire, we specify one white and one output, so sites opened years apart still look like one brand.
What consents apply to illuminated signage in Hertfordshire?
England has no permitted development route for changing a shopfront. Part 7 Class A of the General Permitted Development Order 2015 excludes creating, altering or replacing one, and it allows no alterations at all on article 2(3) land. That leaves two outcomes for illuminated signage at premises in the Hertfordshire area: a planning application, or work that doesn't materially affect the external appearance.
In England, signs at premises in the Hertfordshire area come under the 2007 Advertisement Regulations. An unlit fascia sign generally needs no application under Class 5 of Schedule 3 if it sits on a wall containing a shop window, tops out at 4.6m or the first-floor sill if that is lower, and keeps letters to 0.75m high. Displaying a sign without the consent it needs is a criminal offence, so check before it goes up.
How much does illuminated signage cost in Hertfordshire?
Guide price: £895 to £3,995 plus VAT per sign. Materials, finish and the amount of drawing and coordination involved all move it, and your itemised quotation shows where the money goes on illuminated signage.
| Area | Hertfordshire |
|---|---|
| Nation | England |
| Towns covered | 35 |
| Main town | St Albans |
| Planning regime | England: TCPA 1990 and the 2007 Advertisement Regulations |
| Building approval | Building Regulations (Approved Documents) |
| Survey | Free for new work, from our Great Barr base |
Questions about illuminated signage in Hertfordshire
Can you match the lit signs on my other sites in Hertfordshire?
Usually, yes. We take the letter style, LED colour temperature and output from an existing site, then specify the same again. LED batches vary a little, so we check a sample side by side if the sites are close together.
How disruptive is fitting a lit sign in Hertfordshire?
Very little, as a rule. Fitting usually takes one to two days from a tower or platform, and any cable work inside the shop can be done outside trading hours.
Do you arrange the electrics for signs around St Albans?
Yes. Low-voltage wiring and testing are part of the installation, with the final connection made by a qualified electrician. Any supply work needed is shown on the itemised quotation.
What rules apply to a fire exit door through a shopfront in the Hertfordshire area?
It must open in the direction of escape and can't be locked against immediate use, and a dedicated fire exit can't be a sliding or revolving door. In England that comes from article 14(2) of the Regulatory Reform (Fire Safety) Order 2005, and the duty sits with the responsible person, normally the employer or whoever controls the premises for a business, otherwise the owner. An outward door can clash with section 153 of the Highways Act 1980 where it opens onto the footway, so raise it early.
Does a new shopfront in the Hertfordshire area need Building Regulations approval?
Assume yes until building control says otherwise. England has no like-for-like exemption, though registered installers can self-certify replacement windows and doors in non-dwellings. That route doesn't cover structural glass, curtain walling or revolving doors.