For revolving doors across South Glamorgan, we draw first and order later. You see a scale drawing with signed-off dimensions before anything is made, so the frontage on paper is the frontage you get.
Daylight is only half the brief for revolving doors, because a frontage keeps working after dark. Think about how the glass, the sign and the view inside will read to someone walking past at six o'clock on a winter evening.

Where do you start with revolving doors in South Glamorgan?
Measure the floor before falling for the drum. If your building in South Glamorgan is an older one, the slab may fall toward the street, so we check levels across the full diameter and find out what lies beneath before choosing a drive.
Hotels, offices and flagship stores all use a drum differently. For a lobby in Cardiff or elsewhere in South Glamorgan, we size the compartments for the people arriving, including their luggage, so the door never becomes the slowest part of the welcome.
What consents apply to revolving doors in South Glamorgan?
Section 55 of the Town and Country Planning Act 1990 sets the test in Wales: work that doesn't materially affect the external appearance isn't development. Anything that does needs planning permission, and that goes for revolving doors at premises in the South Glamorgan area as much as for a full new frontage. The council confirms how the test applies to your site.
How much do revolving doors cost in South Glamorgan?
The guide for revolving doors is £19,995 to £59,995 plus VAT per door. Expect the lower end for simple work with clear access, and the upper end where detail, finish or awkward conditions add hours.
| Area | South Glamorgan |
|---|---|
| Nation | Wales |
| Towns covered | 6 |
| Main town | Cardiff |
| Planning regime | Wales: TCPA 1990 and the 1992 Advertisement Regulations |
| Building approval | Building Regulations (Approved Documents for Wales) |
| Survey | Free for new work, from our Great Barr base |
Does Vale of Glamorgan Council publish shopfront guidance?
Yes, Shop Fronts, Frontages and Advertisements Good Practice Guidelines. It tells applicants what the council expects from new and altered shopfronts. A few of the things it asks for:
- Fascias should sit within the shop front frame and typically measure about one quarter of the shop front's height.
- Solid or perforated shutters are not acceptable, and open-weave blinds powder-coated in a complementary colour are advised.
- There is a strong presumption against external shutter boxes and blinds in conservation areas.
Questions about revolving doors in South Glamorgan
Do you install revolving doors in South Glamorgan?
Yes. We travel from Great Barr to survey the entrance, and the floor, structure and door are coordinated under one contract.
Can a lobby in South Glamorgan stay open during installation?
Usually, with the side door or another entrance in use while the drum goes in. We'd agree the sequence with you before the floor work starts.
Is my entrance in Cardiff big enough for a revolving door?
It may be, if the frontage or lobby is generous. A 2.1m drum takes around 2.4m each way, and you'll need room for a side door as well.
Can a roller shutter go on a shop in the South Glamorgan area without planning permission?
Usually not in Wales. Part 42 of the 1995 Order, as inserted in 2014, excludes installing or replacing a security grill or shutter on a shopfront, so the rights for shops don't help. The only way to avoid an application is work that doesn't materially affect the appearance, and the council confirms that.
Can a shop fire exit in the South Glamorgan area use a sliding door?
No, a dedicated fire exit can't be a sliding or revolving door. In Wales, article 14(2) of the Regulatory Reform (Fire Safety) Order 2005 also says fire exit doors must open in the direction of escape and can't be locked against immediate use. The responsible person holds that duty, normally the employer or whoever controls the premises for a business, otherwise the owner.