Many tired frontages are closer to good than they look. On Leeds premises a new sign, fresh colour and better glass can do most of the work of a full replacement.
Expect us to measure the opening, photograph the existing front and check how materials will reach it on the day, at a time you have agreed.

What makes shopfront refurbishment work well on Leeds premises?
If later panels cover the original fascia, we lift a corner at survey. Surviving cornices, pilasters or tile can change the whole plan, and they cost nothing to keep.
Where the sign is the first thing that looks tired, we would start there and work down. A slimmer fascia and better letters can carry a modest frame very well.
If your premises were once two shops, decide early whether the front should read as one or as two. One continuous fascia with a repeated bay width usually settles the elevation better than two mismatched halves, which is worth testing on any Leeds unit of that kind.
How much should you set aside for shopfront refurbishment in Leeds?
Allow £1,995 to £8,995 plus VAT depending on what is kept. Size and specification set most of that figure for shopfront refurbishment, and the rest depends on what the survey finds on site.
Could shopfront refurbishment in Leeds need planning permission?
England has no permitted development route for changing a shopfront. Part 7 Class A of the General Permitted Development Order 2015 excludes creating, altering or replacing one, and it allows no alterations at all on article 2(3) land. That leaves two outcomes for shopfront refurbishment at premises in the Leeds area: a planning application, or work that doesn't materially affect the external appearance.
For Leeds, the usual route for planning and advert applications is through Leeds City Council, and we confirm that when we visit.
| Town | Leeds |
|---|---|
| Area | West Yorkshire |
| Postcode districts | LS1, LS11, LS2, LS3 |
| Planning authority | Leeds City Council |
| Building approval | Building Regulations (Approved Documents) |
| Distance from Great Barr | About 88 miles |
| Survey | Free for new work |
Does Leeds City Council publish shopfront guidance?
Yes, Morley Shopfront Design & Maintenance Guide (2025). It covers Morley town centre only, so it doesn't apply across the whole council area. A few of the things it asks for:
- Fascias in Morley should typically be no taller than 600mm and should not run unbroken across neighbouring buildings.
- Internal security screens must be lattice or scissor types, as solid or pinhole-perforated versions will be rejected.
- uPVC is very rarely appropriate for any shopfront element, and silver or grey aluminium should be avoided on historic buildings.
Questions about shopfront refurbishment in Leeds
Is it worth refurbishing an old aluminium shopfront in Leeds?
Often, yes, if the frame is straight and the corners are tight. Recoating, new gaskets and better glass can add years of life. If the frame is corroded or the door has worn out its fixings, replacement may make more sense.
Can you refurbish just the sign and door on my Leeds frontage?
Yes. A new sign and door gear can make a big difference on their own. We would look at how they sit with the frame and suggest a colour to tie them together.
What if you find more damage on my Leeds premises?
We stop, photograph it and show you the cost before going further. Nothing extra goes ahead without your agreement.
What rules apply to a fire exit door through a shopfront in the Leeds area?
It must open in the direction of escape and can't be locked against immediate use, and a dedicated fire exit can't be a sliding or revolving door. In England that comes from article 14(2) of the Regulatory Reform (Fire Safety) Order 2005, and the duty sits with the responsible person, normally the employer or whoever controls the premises for a business, otherwise the owner. An outward door can clash with section 153 of the Highways Act 1980 where it opens onto the footway, so raise it early.
Does a shop sign in the Leeds area need advertisement consent?
Not always. In England, an unlit sign within Class 5 of the 2007 Advertisement Regulations generally needs no application, and neither does a lit sign within Class 4B. Anything outside those classes needs consent, and Class 4B isn't available in conservation areas, so check before ordering.