We make timber shopfronts for Enfield Lock premises, from plain painted frames to full cornice and console fronts. Every one starts with a measured survey and scale drawings.
Measuring the opening is the easy part of a survey in Enfield Lock. We also look at the beam above, the pavement fall and any meters or drains nearby.

What goes into getting timber shopfronts right in Enfield Lock?
Timber fits a night programme better than you'd think, since most of the joinery is made elsewhere. For a unit in Enfield Lock that can't close by day, we'd fit the frame in stages at night and leave painting until the end, once the dust has gone.
A brand rollout can include timber, as long as the details repeat. For a branch in Enfield Lock we'd use the same mouldings, colours and sign panel as your other sites, adjusting only the widths and heights to fit the opening.
Where units share one long run of fascia, breaking the height makes you stand out for the wrong reason. If that describes your Enfield Lock parade, keep the line and win attention with lettering, lighting and what's in the window.
How much could timber shopfronts in Enfield Lock cost you?
Our guide band is £3,995 to £13,995 plus VAT for a typical frontage. Scope is the biggest lever, so a tighter brief for timber shopfronts brings the figure down faster than any change of detail.
Which applications might timber shopfronts in Enfield Lock involve?
A true like-for-like replacement usually needs no planning permission in England, because the external appearance isn't materially affected. New materials, a different glass line or altered proportions usually do count as material, so for timber shopfronts at premises in the Enfield Lock area, an application is then likely. The council confirms which side of that line a job falls on.
Enfield Lock applications for planning permission or advertisement consent are normally handled by London Borough of Enfield. Our survey includes a check of the position for your address.
| Town | Enfield Lock |
|---|---|
| Area | Greater London |
| Postcode districts | EN1, EN3, EN8, EN9 |
| Planning authority | London Borough of Enfield |
| Building approval | Building Regulations (Approved Documents) |
| Distance from Great Barr | About 100 miles |
| Survey | Free for new work |
Questions about timber shopfronts in Enfield Lock
Can you copy a timber shopfront I've seen in Greater London?
We can work from your photo and borrow what makes it succeed, including proportions, moulding sizes and colour. The front is then drawn to your own Enfield Lock opening.
Do you make the joinery for Enfield Lock shops to order?
Yes. Every length is made to the signed-off drawings for your opening, then brought to Enfield Lock from Great Barr by vetted teams working under S&K Glazing.
Will timber suffer on my Enfield Lock frontage if it gets a lot of rain?
Not if the details are right. Sloped cills, sealed end grain and plinth blocks keep water moving, and the paint system then only has to deal with the weather, not trapped damp.
Does a shop sign in the Enfield Lock area need advertisement consent?
Not always. In England, an unlit sign within Class 5 of the 2007 Advertisement Regulations generally needs no application, and neither does a lit sign within Class 4B. Anything outside those classes needs consent, and Class 4B isn't available in conservation areas, so check before ordering.
What rules apply to a fire exit door through a shopfront in the Enfield Lock area?
It must open in the direction of escape and can't be locked against immediate use, and a dedicated fire exit can't be a sliding or revolving door. In England that comes from article 14(2) of the Regulatory Reform (Fire Safety) Order 2005, and the duty sits with the responsible person, normally the employer or whoever controls the premises for a business, otherwise the owner. An outward door can clash with section 153 of the Highways Act 1980 where it opens onto the footway, so raise it early.