Swinging doors can be a daily nuisance for staff carrying stock through a shop in Mortlake. A sliding set clears the opening with no effort, and keeps the floor space around the door usable.
Measuring the opening is the easy part of a survey in Mortlake. We also look at the beam above, the pavement fall and any meters or drains nearby.

What goes into getting automatic sliding doors right in Mortlake?
A deep recess is a gift for an automatic door. At Mortlake premises with one, we'd set the door back from the street so the sensors see less of the pavement and the leaves get some shelter from the wind.
If your Mortlake entrance catches low sun, infrared sensors can misread the light on the floor. We'd favour radar with a presence sensor set for those conditions, and consider solar control glass in the leaves.
A corner unit has two fronts to think about, and the return elevation often does as much selling as the main one. If that is your layout in Mortlake, carry the fascia and glass line round the corner and treat both faces as one composition.
Which applications might automatic sliding doors in Mortlake involve?
A true like-for-like replacement usually needs no planning permission in England, because the external appearance isn't materially affected. New materials, a different glass line or altered proportions usually do count as material, so for automatic sliding doors at premises in the Mortlake area, an application is then likely. The council confirms which side of that line a job falls on.
At survey we check how things stand for your building, although applications for planning permission or advertisement consent here normally go to London Borough of Richmond upon Thames.
How much could automatic sliding doors in Mortlake cost you?
The guide for automatic sliding doors is £3,895 to £11,995 plus VAT per entrance. Expect the lower end for simple work with clear access, and the upper end where detail, finish or awkward conditions add hours.
| Town | Mortlake |
|---|---|
| Area | Greater London |
| Postcode districts | SW13, SW14, TW9, W4 |
| Planning authority | London Borough of Richmond upon Thames |
| Building approval | Building Regulations (Approved Documents) |
| Distance from Great Barr | About 102 miles |
| Survey | Free for new work |
Does London Borough of Richmond upon Thames publish shopfront guidance?
Yes, Shopfronts: Supplementary Planning Document (2010). It tells applicants what the council expects from new and altered shopfronts. A few of the things it asks for:
- The fascia should be no deeper than the cornice and architrave combined, and no more than one-fifth of total shopfront height.
- External roller shutters are unlikely to be permitted, and internal grilles are the only acceptable security form in conservation areas and on listed buildings.
- Internally lit box fascia signs will usually be resisted, with externally lit fascias generally preferred.
Questions about automatic sliding doors in Mortlake
What do I need to arrange for a door in Mortlake?
Usually just a power supply near the head, and we'll tell you exactly what at survey. We can bring that into the one contract if you'd rather not chase an electrician.
Will the door keep opening for passers-by in Mortlake?
Not if it is set up properly. We narrow the sensor field on site and test it against real footfall, so only people heading for the door trigger it.
Can an automatic door work with my Mortlake shop's alarm and locks?
Yes. The door can lock at closing, and it can link to your alarm or access control where the systems allow, with a manual key position as a fallback.
Do roller shutters need planning permission in the Mortlake area?
Usually yes. Installing or replacing a security grill or shutter on a shopfront is expressly outside England's shop permitted development rights, so the only way to avoid an application is work that doesn't materially affect the appearance. Ask the council before ordering.
What rules apply to a fire exit door through a shopfront in the Mortlake area?
It must open in the direction of escape and can't be locked against immediate use, and a dedicated fire exit can't be a sliding or revolving door. In England that comes from article 14(2) of the Regulatory Reform (Fire Safety) Order 2005, and the duty sits with the responsible person, normally the employer or whoever controls the premises for a business, otherwise the owner. An outward door can clash with section 153 of the Highways Act 1980 where it opens onto the footway, so raise it early.