0800 088 6248 Get a guide price
  1. Home
  2. Services
  3. Perforated roller shutters
  4. Mortlake

Perforated roller shutters in Mortlake

A frontage for Mortlake premises, drawn first and ordered later.

Solid shutters leave a blank wall behind them, and perforated ones do not. Across Mortlake we fit curtains with enough open area for the display to read through them.

It helps if you can be there when we visit Mortlake, since five minutes walking the frontage together answers more than a long email.

Perforated aluminium roller shutter over a lit shop display, seen from the pavement after dark

What goes into getting perforated roller shutters right in Mortlake?

If the shutter has to run past a door or a side window, we check how the curtain lands on the threshold. A neat bottom rail and floor lock keep the entrance flush when the shutter is up.

Where the frame is slim aluminium, guides need fixing back to something solid. We may add a concealed post or a stiffer jamb, so the lower corners cannot be levered out.

A corner unit has two fronts to think about, and the return elevation often does as much selling as the main one. If that is your layout in Mortlake, carry the fascia and glass line round the corner and treat both faces as one composition.

How much could perforated roller shutters in Mortlake cost you?

As a working budget, use £1,695 to £4,495 plus VAT per shutter. Your place inside that range for perforated roller shutters depends mostly on how much of the existing frontage can stay and how much has to be put right first.

Which applications might perforated roller shutters in Mortlake involve?

For perforated roller shutters at premises in the Mortlake area, the deciding question in England is whether the building work materially affects the external appearance. If it does, planning permission is needed, while a true like-for-like replacement usually needs none. The council confirms the position for each site.

Planning and advert applications for Mortlake premises normally go to London Borough of Richmond upon Thames. We check the position for your address at survey.

Mortlake at a glance
TownMortlake
AreaGreater London
Postcode districtsSW13, SW14, TW9, W4
Planning authorityLondon Borough of Richmond upon Thames
Building approvalBuilding Regulations (Approved Documents)
Distance from Great BarrAbout 102 miles
SurveyFree for new work

Does London Borough of Richmond upon Thames publish shopfront guidance?

Yes, Shopfronts: Supplementary Planning Document (2010). It tells applicants what the council expects from new and altered shopfronts. A few of the things it asks for:

  • The fascia should be no deeper than the cornice and architrave combined, and no more than one-fifth of total shopfront height.
  • External roller shutters are unlikely to be permitted, and internal grilles are the only acceptable security form in conservation areas and on listed buildings.
  • Internally lit box fascia signs will usually be resisted, with externally lit fascias generally preferred.

Read our summary of the Richmond upon Thames guidance

Questions about perforated roller shutters in Mortlake

Can you fit an internal shutter on my Mortlake premises?

Usually, yes. We check for ceiling space, a clear path behind the window and a solid fixing for the guides. Where space is tight, a slim box or a smaller display can make it work.

What happens if the shutter jams at closing time in Mortlake?

Do not force it, because that can damage the curtain and motor. Use the manual override if it is safe, then call us. Repairs are charged call-outs, and the fixed price is shown on our site.

Can I keep my window display lit behind a shutter in Mortlake?

Yes, and we recommend it. A low-level light on a timer costs very little and lets the display read through the perforations overnight.

Does a new shopfront in the Mortlake area need Building Regulations approval?

Assume yes until building control says otherwise. England has no like-for-like exemption, though registered installers can self-certify replacement windows and doors in non-dwellings. That route doesn't cover structural glass, curtain walling or revolving doors.

Do I need planning permission to change a shopfront in the Mortlake area?

Usually yes, if the work materially affects the building's external appearance. England's shop permitted development rights exclude creating, altering or replacing a shopfront, so there is no shortcut. A true like-for-like replacement usually needs no application, and the council confirms the position.

Planning perforated roller shutters in Mortlake?

Send the address and a photo, and we'll come and measure it.

Call usGet a guide price