0800 088 6248 Get a guide price
  1. Home
  2. Services
  3. Fascia signage
  4. Blackwall

Fascia signage in Blackwall

A frontage for Blackwall premises, drawn first and ordered later.

New sign, new name or a fascia that has simply faded: any job in Blackwall begins with a measured survey and a look at what sits behind the old panel. Fixings are only as good as the structure they land in.

We measure your Blackwall opening in person, at a time agreed with you first, so the visit fits around your trading.

Deep green shop fascia with built-up metal letters above a glazed entrance

What goes into getting fascia signage right in Blackwall?

A deep fascia above a low shopfront can often be reduced on the drawing board. If your Blackwall premises have one, we would show you a slimmer panel option, with the ceiling line behind it adjusted to suit.

Where the fascia on your Blackwall premises has been overclad, we lift a sample at survey to see what is underneath. Original timber, cornice mouldings or tile may be worth keeping, and they change what the new sign should be.

Where the footway outside your Blackwall premises is narrow, a recessed entrance earns its keep. It gives people a dry place to pause out of the walkway, and it adds a longer run of display glass either side of the door.

How much could fascia signage in Blackwall cost you?

A sensible starting budget is £395 to £1,995 plus VAT per sign. What shifts the figure is whatever can't be seen yet, such as the condition behind the old frontage or the services running through it.

Which applications might fascia signage in Blackwall involve?

For fascia signage at premises in the Blackwall area, the deciding question in England is whether the building work materially affects the external appearance. If it does, planning permission is needed, while a true like-for-like replacement usually needs none. The council confirms the position for each site.

A lit projecting sign at premises in the Blackwall area has firm limits under Class 4B in England: 0.75m² per surface and 1m high. It can project 1m, or two-thirds of the footway if that is less, and it can't sit over the carriageway. A larger sign needs advertisement consent, and so does a lit one in a conservation area.

For Blackwall, the usual route for planning and advert applications is through London Borough of Tower Hamlets, and we confirm that when we visit.

Blackwall at a glance
TownBlackwall
AreaGreater London
Postcode districtsE13, E14, E16, E3
Planning authorityLondon Borough of Tower Hamlets
Building approvalBuilding Regulations (Approved Documents)
Distance from Great BarrAbout 108 miles
SurveyFree for new work

Does London Borough of Tower Hamlets publish shopfront guidance?

Yes, Shopfronts and Roller Shutter Grilles. It tells applicants what the council expects from new and altered shopfronts. A few of the things it asks for:

  • Stallrisers are always required on traditional shopfronts.
  • Fascias should normally be no more than 500mm deep and no higher than ground floor level.
  • External roller shutter boxes will not be permitted, and shutters should wherever possible be an integral feature of the shopfront.

Read our summary of the Tower Hamlets guidance

Questions about fascia signage in Blackwall

Will a new sign suit the rest of my Blackwall frontage?

That is what the scale drawing is for. We draw the sign on your actual elevation with door, windows and stallriser in place, so you can judge colour and proportion together.

What artwork do you need for a sign in Blackwall?

Vector files such as AI, EPS or PDF are ideal, along with any brand guidelines. If you only have a low-resolution logo, it can be redrawn, and that time is shown on the quotation.

Will you remove the old sign from my Blackwall premises?

Yes. Taking down the old sign, clearing old fixings and making good are included in the itemised quotation. We tell you what we find behind it before going further.

Does a shop sign in the Blackwall area need advertisement consent?

Not always. In England, an unlit sign within Class 5 of the 2007 Advertisement Regulations generally needs no application, and neither does a lit sign within Class 4B. Anything outside those classes needs consent, and Class 4B isn't available in conservation areas, so check before ordering.

What rules apply to a fire exit door through a shopfront in the Blackwall area?

It must open in the direction of escape and can't be locked against immediate use, and a dedicated fire exit can't be a sliding or revolving door. In England that comes from article 14(2) of the Regulatory Reform (Fire Safety) Order 2005, and the duty sits with the responsible person, normally the employer or whoever controls the premises for a business, otherwise the owner. An outward door can clash with section 153 of the Highways Act 1980 where it opens onto the footway, so raise it early.

Planning fascia signage in Blackwall?

Send the address and a photo, and we'll come and measure it.

Call usGet a guide price