0800 088 6248 Get a guide price
  1. Home
  2. Services
  3. Aluminium shopfronts
  4. Blackwall

Aluminium shopfronts in Blackwall

One itemised price and one named contact for Blackwall premises.

A good aluminium shopfront in Blackwall should look as if it grew out of the building above it. We set the stallriser, mullions and fascia from the proportions of your elevation, across Blackwall and the rest of Greater London.

Expect us to measure the opening, photograph the existing front and check how materials will reach it on the day, at a time you have agreed.

Dark bronze aluminium shopfront with slim frames, a low stallriser and a glazed entrance door

What goes into getting aluminium shopfronts right in Blackwall?

A narrow Blackwall unit gains from fewer parts. Under about 4m wide, we'd offset the door and use one large pane rather than a central door with two slivers of glass either side, which makes the front feel wider than it measures.

Where a unit in Blackwall can't afford a closed day, a night fit is worth pricing. Strip-out and frame go in over consecutive nights, with temporary boarding between shifts, so the shop opens each morning weathertight and secure.

Where the footway outside your Blackwall premises is narrow, a recessed entrance earns its keep. It gives people a dry place to pause out of the walkway, and it adds a longer run of display glass either side of the door.

How much could aluminium shopfronts in Blackwall cost you?

We would budget £2,495 to £11,995 plus VAT for a typical 3 to 7 m frontage. Scope sets most of the figure, so a clear brief at the start does more for the budget than any later change of detail.

Which applications might aluminium shopfronts in Blackwall involve?

A true like-for-like replacement usually needs no planning permission in England, because the external appearance isn't materially affected. New materials, a different glass line or altered proportions usually do count as material, so for aluminium shopfronts at premises in the Blackwall area, an application is then likely. The council confirms which side of that line a job falls on.

For Blackwall, the usual route for planning and advert applications is through London Borough of Tower Hamlets, and we confirm that when we visit.

Blackwall at a glance
TownBlackwall
AreaGreater London
Postcode districtsE13, E14, E16, E3
Planning authorityLondon Borough of Tower Hamlets
Building approvalBuilding Regulations (Approved Documents)
Distance from Great BarrAbout 108 miles
SurveyFree for new work

Does London Borough of Tower Hamlets publish shopfront guidance?

Yes, Shopfronts and Roller Shutter Grilles. It tells applicants what the council expects from new and altered shopfronts. A few of the things it asks for:

  • Stallrisers are always required on traditional shopfronts.
  • Fascias should normally be no more than 500mm deep and no higher than ground floor level.
  • External roller shutter boxes will not be permitted, and shutters should wherever possible be an integral feature of the shopfront.

Read our summary of the Tower Hamlets guidance

Questions about aluminium shopfronts in Blackwall

Can I keep trading while my Blackwall shopfront is replaced?

Often, yes. The front can usually be replaced a section at a time, with temporary screens keeping the shop secure, and a closed-day or out-of-hours fit can be arranged if that suits you better.

What do you need before surveying a unit in Blackwall?

An address, a few photos and a rough idea of what you have in mind are enough to book the survey. If you have a lease, a landlord's specification or brand guidelines, send those too, because they shape the drawing.

How does pricing work for Blackwall premises?

Every price comes from a measure-up, never a photograph. You get an itemised written quotation that holds for 90 days, and nothing is ordered until you accept it.

What rules apply to a fire exit door through a shopfront in the Blackwall area?

It must open in the direction of escape and can't be locked against immediate use, and a dedicated fire exit can't be a sliding or revolving door. In England that comes from article 14(2) of the Regulatory Reform (Fire Safety) Order 2005, and the duty sits with the responsible person, normally the employer or whoever controls the premises for a business, otherwise the owner. An outward door can clash with section 153 of the Highways Act 1980 where it opens onto the footway, so raise it early.

Does a shop sign in the Blackwall area need advertisement consent?

Not always. In England, an unlit sign within Class 5 of the 2007 Advertisement Regulations generally needs no application, and neither does a lit sign within Class 4B. Anything outside those classes needs consent, and Class 4B isn't available in conservation areas, so check before ordering.

Planning aluminium shopfronts in Blackwall?

Send the address and a photo, and we'll come and measure it.

Call usGet a guide price