For frameless glass doors across County Tyrone, we draw first and order later. You see a scale drawing with signed-off dimensions before anything is made, so the frontage on paper is the frontage you get.
Access gets as much attention as appearance at survey. Where a vehicle can stop, how long sections reach the opening and how the pavement stays safe for the public all shape the programme for frameless glass doors in County Tyrone.

What makes frameless glass doors work well for premises in County Tyrone?
A frameless door doesn't have to match a frameless front. For premises across County Tyrone, it can sit well in a timber or aluminium surround, as long as the head line and the handle finish tie in with what's already there.
What's under the threshold decides the door. For premises across County Tyrone, we check for cellars, pipes and thin screeds at survey, because a floor spring needs depth and old shops don't always have it.
What consents apply to frameless glass doors in County Tyrone?
Northern Ireland appears to have no permitted development route for a shopfront, as its 2015 Order mentions shops only in the Part 4 changes of use. For frameless glass doors at premises in the County Tyrone area, expect a planning application unless the external appearance isn't materially affected. Ask the council to confirm the position.
How much do frameless glass doors cost in County Tyrone?
The guide for frameless glass doors is £1,495 to £4,495 plus VAT per door set. Expect the lower end for simple work with clear access, and the upper end where detail, finish or awkward conditions add hours.
| Area | County Tyrone |
|---|---|
| Nation | Northern Ireland |
| Towns covered | 4 |
| Main town | Omagh |
| Planning regime | Northern Ireland: Planning Act 2011 and the 2015 Advertisement Regulations |
| Building approval | Building Control (Technical Booklets) |
| Survey | Free for new work, from our Great Barr base |
Does Fermanagh and Omagh District Council publish shopfront guidance?
Yes, Shop Front Design, Supplementary Planning Guidance. It tells applicants what the council expects from new and altered shopfronts. A few of the things it asks for:
- Stallrisers should not exceed the pilaster base or fascia depth, whichever is less, with depths up to 600mm generally acceptable.
- Fascia depths up to 600mm are generally acceptable, one fascia should not span two buildings, and box fascia signs should be avoided.
- External solid roller shutters are not acceptable, with security glass, internal lattice shutters or demountable mesh grilles preferred.
Questions about frameless glass doors in County Tyrone
Can you replace just the door at my County Tyrone premises?
Yes, if the surrounding frame or glass is sound. We'd measure the opening and check the existing floor spring, as it may need replacing too.
Do you fit frameless glass doors across County Tyrone?
Yes. We travel from Great Barr to survey, make a final check measure and fit each door set.
What if my floor in County Tyrone can't take a floor spring?
We'd use a concealed closer in a slim transom. It keeps the look almost the same, and suits floors over a cellar or with services beneath.
Does a shop sign in the County Tyrone area need advertisement consent?
Not always. Under Northern Ireland's 2015 Regulations, an unlit sign within Class 5 generally needs no application, with a 5m top height and 0.3m letters, and neither does a lit sign within Class 4(2). That lit class isn't available in conservation areas, Areas of Outstanding Natural Beauty or National Parks, so ask first.
Do roller shutters need planning permission in the County Tyrone area?
Usually yes, when they materially affect the external appearance. No permitted development route for shutters appears in Northern Ireland's 2015 Order, so treat them as falling to the appearance test. Check with the council before ordering.