Seen a frontage you wish was yours? Send us a photo of it, and we'll work out why it succeeds and draw something as good for your South Kensington premises.
Expect us to measure the opening, photograph the existing front and check how materials will reach it on the day, at a time you have agreed.

How do you design around the building when planning aluminium shopfronts in South Kensington?
If your South Kensington frontage faces south or west, the colour choice has a physical effect. Dark frames run hot in full sun and long runs of aluminium move, so we'd leave room for expansion at the fascia and look at solar control glass to protect stock.
If your unit sits in a parade in South Kensington, we'd start with the neighbours: the fascia line, cill height and pier rhythm of the row. Holding those lines lets a slimmer section stand out for the right reasons, rather than fighting everything beside it.
Where a fascia has crept down over the years, lifting it back to its original line can add real height to the glass. Check what sits behind it first at South Kensington premises, since a shutter box or old beam may set the limit.
What might aluminium shopfronts cost in South Kensington?
We would budget £2,495 to £11,995 plus VAT for a typical 3 to 7 m frontage. Scope sets most of the figure, so a clear brief at the start does more for the budget than any later change of detail.
What permissions should you check for aluminium shopfronts in South Kensington?
Security grilles and shutters are named in England's rules: installing or replacing one on a shopfront sits outside the shop permitted development rights. The frontage itself is treated the same way, so for aluminium shopfronts at premises in the South Kensington area, building work that materially affects the appearance needs planning permission. Confirm the position with the council before anything is ordered.
Expect planning and advert applications here to go to Royal Borough of Kensington and Chelsea in the normal way. We check what that means for your building when we survey it in South Kensington.
| Town | South Kensington |
|---|---|
| Area | Greater London |
| Postcode districts | SW7 |
| Planning authority | Royal Borough of Kensington and Chelsea |
| Building approval | Building Regulations (Approved Documents) |
| Distance from Great Barr | About 104 miles |
| Survey | Free for new work |
Does Royal Borough of Kensington and Chelsea publish shopfront guidance?
Yes, Shopfront Design Guidelines Supplementary Planning Document (2011). It tells applicants what the council expects from new and altered shopfronts. A few of the things it asks for:
- Stallriser height should not exceed the base of the pilasters, around 450mm, or the fascia depth, whichever is less.
- Box fascias are not to be used, and painted timber is treated as the most appropriate fascia on nineteenth-century buildings.
- External shutters are not acceptable across most of the borough, with internal open-link grilles preferred.
Questions about aluminium shopfronts in South Kensington
Can I keep trading while my South Kensington shopfront is replaced?
Often, yes. The front can usually be replaced a section at a time, with temporary screens keeping the shop secure, and a closed-day or out-of-hours fit can be arranged if that suits you better.
Can you match a shopfront I like elsewhere in Greater London?
Usually, yes. Send the photo and address, and we'll work out the section, colour and proportions behind it, then adapt them to your South Kensington opening.
Can a sign and shutter be fitted with the frame in South Kensington?
Yes, and it's usually the neater way to do it. One contract covers the frontage, so the shutter box, fascia and sign fixings are drawn together and nobody is left waiting for another trade.
Does the Equality Act apply to a shop entrance in the South Kensington area?
Yes. The Equality Act 2010 applies in England, as across Great Britain, and it requires reasonable steps to remove, alter or avoid physical features that disadvantage disabled people. The duty is anticipatory, so it looks at disabled people generally, and a new Services Code replaced the 2011 Code on 5 August 2026.
Do roller shutters need planning permission in the South Kensington area?
Usually yes. Installing or replacing a security grill or shutter on a shopfront is expressly outside England's shop permitted development rights, so the only way to avoid an application is work that doesn't materially affect the appearance. Ask the council before ordering.