0800 088 6248 Get a guide price
  1. Home
  2. Services
  3. Aluminium shopfronts
  4. Kensington

Aluminium shopfronts in Kensington

Written quotation for aluminium shopfronts in Kensington, valid for 90 days.

Seen a frontage you wish was yours? Send us a photo of it, and we'll work out why it succeeds and draw something as good for your Kensington premises.

Measuring the opening is the easy part of a survey in Kensington. We also look at the beam above, the pavement fall and any meters or drains nearby.

Dark bronze aluminium shopfront with slim frames, a low stallriser and a glazed entrance door

Where should you begin with aluminium shopfronts in Kensington?

If your Kensington branch is one stop in a wider rollout, we'd adapt your standard details to this opening instead of forcing the opening to fit them. Section, colour and fixings stay the same as the rest of the estate, while mullion spacing and fascia depth answer to the building.

A narrow Kensington unit gains from fewer parts. Under about 4m wide, we'd offset the door and use one large pane rather than a central door with two slivers of glass either side, which makes the front feel wider than it measures.

Where the footway outside your Kensington premises is narrow, a recessed entrance earns its keep. It gives people a dry place to pause out of the walkway, and it adds a longer run of display glass either side of the door.

What sign-off might you need for aluminium shopfronts in Kensington?

Security grilles and shutters are named in England's rules: installing or replacing one on a shopfront sits outside the shop permitted development rights. The frontage itself is treated the same way, so for aluminium shopfronts at premises in the Kensington area, building work that materially affects the appearance needs planning permission. Confirm the position with the council before anything is ordered.

At survey we check how things stand for your building, although applications for planning permission or advertisement consent here normally go to Royal Borough of Kensington and Chelsea.

What price should you expect for aluminium shopfronts in Kensington?

The guide for aluminium shopfronts is £2,495 to £11,995 plus VAT for a typical 3 to 7 m frontage. Expect the lower end for simple work with clear access, and the upper end where detail, finish or awkward conditions add hours.

Kensington at a glance
TownKensington
AreaGreater London
Postcode districtsW8
Planning authorityRoyal Borough of Kensington and Chelsea
Building approvalBuilding Regulations (Approved Documents)
Distance from Great BarrAbout 103 miles
SurveyFree for new work

Does Royal Borough of Kensington and Chelsea publish shopfront guidance?

Yes, Shopfront Design Guidelines Supplementary Planning Document (2011). It tells applicants what the council expects from new and altered shopfronts. A few of the things it asks for:

  • Stallriser height should not exceed the base of the pilasters, around 450mm, or the fascia depth, whichever is less.
  • Box fascias are not to be used, and painted timber is treated as the most appropriate fascia on nineteenth-century buildings.
  • External shutters are not acceptable across most of the borough, with internal open-link grilles preferred.

Read our summary of the Kensington and Chelsea guidance

Questions about aluminium shopfronts in Kensington

How does pricing work for Kensington premises?

Every price comes from a measure-up, never a photograph. You get an itemised written quotation that holds for 90 days, and nothing is ordered until you accept it.

Will an aluminium front make my Kensington shop warmer?

It can, though the glass matters more than the frame. A thermally broken section with double-glazed units loses less heat than single glazing, and a well-sealed door is often the change you notice most on a cold day.

Can you match a shopfront I like elsewhere in Greater London?

Usually, yes. Send the photo and address, and we'll work out the section, colour and proportions behind it, then adapt them to your Kensington opening.

Does a shop sign in the Kensington area need advertisement consent?

Not always. In England, an unlit sign within Class 5 of the 2007 Advertisement Regulations generally needs no application, and neither does a lit sign within Class 4B. Anything outside those classes needs consent, and Class 4B isn't available in conservation areas, so check before ordering.

Do roller shutters need planning permission in the Kensington area?

Usually yes. Installing or replacing a security grill or shutter on a shopfront is expressly outside England's shop permitted development rights, so the only way to avoid an application is work that doesn't materially affect the appearance. Ask the council before ordering.

Planning aluminium shopfronts in Kensington?

Send the address and a photo, and we'll come and measure it.

Call usGet a guide price