Automatic sliding doors for Earls Court premises start with how people reach your entrance. We look at the pavement, the footfall and the space either side of the opening before recommending a door.
It helps if you can be there when we visit Earls Court, since five minutes walking the frontage together answers more than a long email.

What goes into getting automatic sliding doors right in Earls Court?
If your Earls Court entrance catches low sun, infrared sensors can misread the light on the floor. We'd favour radar with a presence sensor set for those conditions, and consider solar control glass in the leaves.
In a parade in Earls Court with a narrow pavement, the sensor set-up is the first job. We'd angle the radar so people walking past don't trigger the door, and keep the leaves in line with the neighbouring frontage.
If there are storeys above the shop, the frontage should feel like the base of the building and not a sign stuck on it. Lining up mullions with the windows overhead is a small move that settles the whole elevation at Earls Court premises.
Which applications might automatic sliding doors in Earls Court involve?
For automatic sliding doors at premises in the Earls Court area, the deciding question in England is whether the building work materially affects the external appearance. If it does, planning permission is needed, while a true like-for-like replacement usually needs none. The council confirms the position for each site.
Expect planning and advert applications here to go to Royal Borough of Kensington and Chelsea in the normal way. We check what that means for your building when we survey it in Earls Court.
How much could automatic sliding doors in Earls Court cost you?
We would budget £3,895 to £11,995 plus VAT per entrance. Scope sets most of the figure, so a clear brief at the start does more for the budget than any later change of detail.
| Town | Earls Court |
|---|---|
| Area | Greater London |
| Postcode districts | SW10, SW5, W14, W8 |
| Planning authority | Royal Borough of Kensington and Chelsea |
| Building approval | Building Regulations (Approved Documents) |
| Distance from Great Barr | About 103 miles |
| Survey | Free for new work |
Does Royal Borough of Kensington and Chelsea publish shopfront guidance?
Yes, Shopfront Design Guidelines Supplementary Planning Document (2011). It tells applicants what the council expects from new and altered shopfronts. A few of the things it asks for:
- Stallriser height should not exceed the base of the pilasters, around 450mm, or the fascia depth, whichever is less.
- Box fascias are not to be used, and painted timber is treated as the most appropriate fascia on nineteenth-century buildings.
- External shutters are not acceptable across most of the borough, with internal open-link grilles preferred.
Questions about automatic sliding doors in Earls Court
How noisy would an automatic door be at my Earls Court shop?
A healthy door is very quiet, and you'd normally hear only a soft hum. Noise usually means worn rollers or grit in the guide, which a service will put right.
What do I need to arrange for a door in Earls Court?
Usually just a power supply near the head, and we'll tell you exactly what at survey. We can bring that into the one contract if you'd rather not chase an electrician.
Will an automatic door fit my Earls Court shop?
It depends on the width of the front and the depth at the head. A survey shows whether the parked leaves fit and where the operator can hide, and if a slider won't work we'd look at a powered swing door.
Does a shop sign in the Earls Court area need advertisement consent?
Not always. In England, an unlit sign within Class 5 of the 2007 Advertisement Regulations generally needs no application, and neither does a lit sign within Class 4B. Anything outside those classes needs consent, and Class 4B isn't available in conservation areas, so check before ordering.
Does a new shopfront in the Earls Court area need Building Regulations approval?
Assume yes until building control says otherwise. England has no like-for-like exemption, though registered installers can self-certify replacement windows and doors in non-dwellings. That route doesn't cover structural glass, curtain walling or revolving doors.