Design, manufacture, wiring and fitting all sit under one contract for lit signs across Highgate and Greater London. Your named contact handles the job from measured survey to first switch-on.
We measure your Highgate opening in person, at a time agreed with you first, so the visit fits around your trading.

Where should you begin with illuminated signage in Highgate?
If there are flats above your Highgate premises, we would keep the output modest and put the sign on a timer. A warm white at lower brightness is kinder to neighbours and still does its job.
If an old lightbox is coming down, we check the cable position and the wall behind it before designing the new sign. An existing supply can often be reused, which saves work on the inside.
Where the building has good brick or stone around the opening, set the frame back in the reveal so the masonry can be seen. On Highgate premises with a flat elevation, that deep reveal throws a shadow line that adds real depth in low sun.
What sign-off might you need for illuminated signage in Highgate?
Security grilles and shutters are named in England's rules: installing or replacing one on a shopfront sits outside the shop permitted development rights. The frontage itself is treated the same way, so for illuminated signage at premises in the Highgate area, building work that materially affects the appearance needs planning permission. Confirm the position with the council before anything is ordered.
A lit projecting sign at premises in the Highgate area has firm limits under Class 4B in England: 0.75m² per surface and 1m high. It can project 1m, or two-thirds of the footway if that is less, and it can't sit over the carriageway. A larger sign needs advertisement consent, and so does a lit one in a conservation area.
Expect planning and advert applications here to go to London Borough of Camden in the normal way. We check what that means for your building when we survey it in Highgate.
What price should you expect for illuminated signage in Highgate?
A sensible starting budget is £895 to £3,995 plus VAT per sign. What shifts the figure is whatever can't be seen yet, such as the condition behind the old frontage or the services running through it.
| Town | Highgate |
|---|---|
| Area | Greater London |
| Postcode districts | N19, N6, NW3, NW5 |
| Planning authority | London Borough of Camden |
| Building approval | Building Regulations (Approved Documents) |
| Distance from Great Barr | About 101 miles |
| Survey | Free for new work |
Does London Borough of Camden publish shopfront guidance?
Yes, Camden Planning Guidance: Design (Chapter 6: Shopfronts) (2021). It tells applicants what the council expects from new and altered shopfronts. A few of the things it asks for:
- Existing stall risers should be kept, and new ones should be at least 300mm high or reach the top of the pilaster base or door panel.
- Solid shutters are only acceptable in exceptional circumstances, and internal security measures are strongly encouraged.
- Uncoated shutters, galvanised steel, milled finishes and anodised aluminium are not acceptable finishes.
Questions about illuminated signage in Highgate
Can an illuminated sign be fitted around trading in Highgate?
Yes. External fitting is usually done from a tower or platform with little effect on the shop, and internal cable work can be arranged out of hours.
Will a lit sign in Highgate cost much to run?
Very little. A typical LED sign uses about the same power as a few domestic lamps, and a timer trims that further. Occasional driver changes are the larger long-term cost.
Can you replace a lightbox on my Highgate premises?
Yes. We take the old box down, check the wall and supply behind it, then fit the new sign. Built-up letters will often need a new panel, because the old box leaves a mark on the fascia.
Do I need listed building consent for a shopfront in the Highgate area?
Usually yes, if the building is listed. In England the local planning authority decides, and Historic England is notified of Grade I and II* works and specified Grade II works. Like-for-like repair may not need consent, so ask the council before work starts.
What rules apply to a fire exit door through a shopfront in the Highgate area?
It must open in the direction of escape and can't be locked against immediate use, and a dedicated fire exit can't be a sliding or revolving door. In England that comes from article 14(2) of the Regulatory Reform (Fire Safety) Order 2005, and the duty sits with the responsible person, normally the employer or whoever controls the premises for a business, otherwise the owner. An outward door can clash with section 153 of the Highways Act 1980 where it opens onto the footway, so raise it early.