0800 088 6248 Get a guide price
  1. Home
  2. Services
  3. Curtain walling
  4. Colwyn Bay

Curtain walling in Colwyn Bay

Sightlines, proportion and finish worked out for your Colwyn Bay building.

Daylight deep into the floor plate is often what makes curtain walling worth the money. For Colwyn Bay premises we weigh that against solar gain and glare, so the glass works in July as well as in January.

It helps if you can be there when we visit Colwyn Bay, since five minutes walking the frontage together answers more than a long email.

Aluminium curtain walling with slim mullions across a two-storey commercial facade at dusk

What goes into getting curtain walling right in Colwyn Bay?

If the frontage joins a neighbouring building in Colwyn Bay, we draw that junction in full at design stage. The last mullion, the flashing and the movement joint are details people notice from the pavement.

Should the floors above stay occupied, the work can be phased bay by bay, with temporary weathering at the end of each shift. Tenants keep their rooms dry and the old elevation comes out in an order that suits the building.

If your Colwyn Bay unit is narrow, a central door can split a small window into two weak ones. Moving the door to one side gives you a single confident pane, provided the layout inside still works.

Which applications might curtain walling in Colwyn Bay involve?

Going by Part 42 of the 1995 Order as inserted in 2014, Wales has no permitted development route for changing a shopfront. The right covers A1 and A2 premises, but it excludes creating, altering or replacing a shopfront, or fitting or replacing a security grill or shutter on one, and it doesn't apply on Article 1(5) land. For curtain walling at premises in the Colwyn Bay area, that leaves a planning application, or work that leaves the appearance materially unchanged.

Expect planning and advert applications here to go to Conwy County Borough Council in the normal way. We check what that means for your building when we survey it in Colwyn Bay.

How much could curtain walling in Colwyn Bay cost you?

We would budget £550 to £1,250 plus VAT per m². Scope sets most of the figure, so a clear brief at the start does more for the budget than any later change of detail.

Colwyn Bay at a glance
TownColwyn Bay
AreaClwyd
Postcode districtsLL28, LL29, LL30, LL31
Planning authorityConwy County Borough Council
Building approvalBuilding Regulations (Approved Documents for Wales)
Distance from Great BarrAbout 91 miles
SurveyFree for new work

Does Conwy County Borough Council publish shopfront guidance?

Yes, LDP36: Shop front design (2017). It tells applicants what the council expects from new and altered shopfronts. A few of the things it asks for:

  • Stallriser height should not normally exceed 20% of the overall shopfront height.
  • Fascia depth is restricted to the depth of the console, or one-fifth of the distance from cornice to pavement where there are no consoles.
  • Illuminated box signs and vinyl or acrylic signs are not permitted in conservation areas or on historic buildings, with halo-lit or individually lit letters preferred.

Read our summary of the Conwy guidance

Questions about curtain walling in Colwyn Bay

Can you replace failing curtain walling on premises in Colwyn Bay?

Yes. We survey the frame, brackets and seals first, because some elevations only need new glass and gaskets. If the frame itself has failed, we draw a replacement that can be phased around the building's use.

Can you match the frames already on my Colwyn Bay building?

Usually, yes. Colour can be matched to a RAL reference or a sample, and cap profiles can be chosen to sit close to what is there. An exact match on an old system may not be possible, in which case we would suggest a deliberate change at a natural break.

Can part of an elevation in Colwyn Bay be done first?

Yes, provided the break falls at a sensible mullion. Phasing can spread cost and disruption, although two visits usually cost more than one. We would draw the whole elevation first so the second phase matches.

Can a roller shutter go on a shop in the Colwyn Bay area without planning permission?

Usually not in Wales. Part 42 of the 1995 Order, as inserted in 2014, excludes installing or replacing a security grill or shutter on a shopfront, so the rights for shops don't help. The only way to avoid an application is work that doesn't materially affect the appearance, and the council confirms that.

Who decides listed building consent for a shopfront in the Colwyn Bay area?

Planning authorities and Welsh Ministers share control of listed building consent in Wales, under the Historic Environment (Wales) Act 2023. Cadw is the national body, and the 1990 Act no longer applies. Ask the council where an application should start.

Planning curtain walling in Colwyn Bay?

Send the address and a photo, and we'll come and measure it.

Call usGet a guide price