Colour and craft do the work on a timber front in Colwyn Bay. We test paint on your actual frontage, draw any moulding that matters at full size, and keep every dimension on paper for you to sign off.
Surveys for Colwyn Bay are booked with you directly. Tell us your quieter days and we'll work around them.

What should you think about before commissioning timber shopfronts in Colwyn Bay?
A corner plot gives a timber front two faces and one chance to get the turn right. For Colwyn Bay premises on a corner, we'd use a pilaster or a canted bay at the angle, so the cornice wraps round without a clumsy mitre.
In a parade of mixed fronts in Colwyn Bay, painted timber can lift a unit without shouting. We'd take the height of the neighbouring cills and fascias, then let the depth of the mouldings and a considered colour do the talking.
Where the building has good brick or stone around the opening, set the frame back in the reveal so the masonry can be seen. On Colwyn Bay premises with a flat elevation, that deep reveal throws a shadow line that adds real depth in low sun.
Who approves timber shopfronts in Colwyn Bay?
Going by Part 42 of the 1995 Order as inserted in 2014, Wales has no permitted development route for changing a shopfront. The right covers A1 and A2 premises, but it excludes creating, altering or replacing a shopfront, or fitting or replacing a security grill or shutter on one, and it doesn't apply on Article 1(5) land. For timber shopfronts at premises in the Colwyn Bay area, that leaves a planning application, or work that leaves the appearance materially unchanged.
We confirm the position at survey, because a boundary or a special designation can change who handles the file, but applications from Colwyn Bay premises normally go to Conwy County Borough Council.
What is a realistic budget for timber shopfronts in Colwyn Bay?
Our guide band is £3,995 to £13,995 plus VAT for a typical frontage. Scope is the biggest lever, so a tighter brief for timber shopfronts brings the figure down faster than any change of detail.
| Town | Colwyn Bay |
|---|---|
| Area | Clwyd |
| Postcode districts | LL28, LL29, LL30, LL31 |
| Planning authority | Conwy County Borough Council |
| Building approval | Building Regulations (Approved Documents for Wales) |
| Distance from Great Barr | About 91 miles |
| Survey | Free for new work |
Does Conwy County Borough Council publish shopfront guidance?
Yes, LDP36: Shop front design (2017). It tells applicants what the council expects from new and altered shopfronts. A few of the things it asks for:
- Stallriser height should not normally exceed 20% of the overall shopfront height.
- Fascia depth is restricted to the depth of the console, or one-fifth of the distance from cornice to pavement where there are no consoles.
- Illuminated box signs and vinyl or acrylic signs are not permitted in conservation areas or on historic buildings, with halo-lit or individually lit letters preferred.
Questions about timber shopfronts in Colwyn Bay
Will timber suffer on my Colwyn Bay frontage if it gets a lot of rain?
Not if the details are right. Sloped cills, sealed end grain and plinth blocks keep water moving, and the paint system then only has to deal with the weather, not trapped damp.
How much disruption will a timber front cause in my Colwyn Bay shop?
Expect more time on site than an aluminium front, typically 3 to 7 days with the painting. Closed-day or out-of-hours fitting can be arranged, and the opening stays boarded and secure between stages.
Can you fit a timber front around existing tiles in Colwyn Bay?
Often, yes, and it's usually worth trying. If your stallriser or entrance has good original tile, we'd measure it carefully and scribe the new joinery to it.
Does a replacement shopfront in the Colwyn Bay area need Building Regulations approval?
Assume yes until building control says otherwise, because Wales has no like-for-like exemption. Glazing is judged against Approved Document N, as Wales keeps Part N. A registered installer can self-certify replacement windows and doors in non-dwellings, but not structural glass, curtain walling or revolving doors.
Who decides listed building consent for a shopfront in the Colwyn Bay area?
Planning authorities and Welsh Ministers share control of listed building consent in Wales, under the Historic Environment (Wales) Act 2023. Cadw is the national body, and the 1990 Act no longer applies. Ask the council where an application should start.