0800 088 6248 Get a guide price
  1. Home
  2. Services
  3. Shopfront refurbishment
  4. Colwyn Bay

Shopfront refurbishment in Colwyn Bay

Survey, drawings and a written price for shopfront refurbishment in Colwyn Bay.

Refurbishment is a design job as much as a repair job. Small changes to colour, fascia depth and lighting can lift frontages in Colwyn Bay far more than their cost suggests.

A survey in Colwyn Bay usually starts outside, looking at the whole elevation before any tape comes out, because the frontage has to answer the building above it.

Refurbished timber shopfront with fresh paint, new glass and a restored fascia on a brick parade

How do you design around the building when planning shopfront refurbishment in Colwyn Bay?

Where the sign is the first thing that looks tired, we would start there and work down. A slimmer fascia and better letters can carry a modest frame very well.

Where the frontage is timber, we probe the sills, bottom rails and door jambs before quoting. Rot usually starts low, and a spliced repair in hardwood can save more of the joinery than you might expect.

If there are storeys above the shop, the frontage should feel like the base of the building and not a sign stuck on it. Lining up mullions with the windows overhead is a small move that settles the whole elevation at Colwyn Bay premises.

What permissions should you check for shopfront refurbishment in Colwyn Bay?

Section 55 of the Town and Country Planning Act 1990 sets the test in Wales: work that doesn't materially affect the external appearance isn't development. Anything that does needs planning permission, and that goes for shopfront refurbishment at premises in the Colwyn Bay area as much as for a full new frontage. The council confirms how the test applies to your site.

Expect planning and advert applications here to go to Conwy County Borough Council in the normal way. We check what that means for your building when we survey it in Colwyn Bay.

What might shopfront refurbishment cost in Colwyn Bay?

A sensible starting budget is £1,995 to £8,995 plus VAT depending on what is kept. What shifts the figure is whatever can't be seen yet, such as the condition behind the old frontage or the services running through it.

Colwyn Bay at a glance
TownColwyn Bay
AreaClwyd
Postcode districtsLL28, LL29, LL30, LL31
Planning authorityConwy County Borough Council
Building approvalBuilding Regulations (Approved Documents for Wales)
Distance from Great BarrAbout 91 miles
SurveyFree for new work

Does Conwy County Borough Council publish shopfront guidance?

Yes, LDP36: Shop front design (2017). It tells applicants what the council expects from new and altered shopfronts. A few of the things it asks for:

  • Stallriser height should not normally exceed 20% of the overall shopfront height.
  • Fascia depth is restricted to the depth of the console, or one-fifth of the distance from cornice to pavement where there are no consoles.
  • Illuminated box signs and vinyl or acrylic signs are not permitted in conservation areas or on historic buildings, with halo-lit or individually lit letters preferred.

Read our summary of the Conwy guidance

Questions about shopfront refurbishment in Colwyn Bay

How do I know if my Colwyn Bay shopfront needs replacing?

A measured survey will show you. We check the frame, joints, door and glass, then tell you plainly whether refurbishment will last or whether a new shopfront would be better value.

What if you find more damage on my Colwyn Bay premises?

We stop, photograph it and show you the cost before going further. Nothing extra goes ahead without your agreement.

Can a refurbishment make my Colwyn Bay premises easier to enter?

Often, yes. Lighter door closers, better handles and a lower threshold can all be added without replacing the frontage. We check the door width and the step at survey.

Can a shop fire exit in the Colwyn Bay area use a sliding door?

No, a dedicated fire exit can't be a sliding or revolving door. In Wales, article 14(2) of the Regulatory Reform (Fire Safety) Order 2005 also says fire exit doors must open in the direction of escape and can't be locked against immediate use. The responsible person holds that duty, normally the employer or whoever controls the premises for a business, otherwise the owner.

Can a roller shutter go on a shop in the Colwyn Bay area without planning permission?

Usually not in Wales. Part 42 of the 1995 Order, as inserted in 2014, excludes installing or replacing a security grill or shutter on a shopfront, so the rights for shops don't help. The only way to avoid an application is work that doesn't materially affect the appearance, and the council confirms that.

Planning shopfront refurbishment in Colwyn Bay?

Send the address and a photo, and we'll come and measure it.

Call usGet a guide price