Seen a frontage you admire? Bring the picture to our first talk about revolving doors in Lanarkshire, and we will work out what makes it succeed, from fascia depth to glass line, and what that means for your building.
Daylight is only half the brief for revolving doors, because a frontage keeps working after dark. Think about how the glass, the sign and the view inside will read to someone walking past at six o'clock on a winter evening.

How do we handle revolving doors for premises in Lanarkshire?
Wind is usually the reason to choose a drum. For premises across Lanarkshire, we look at how the entrance is exposed, because a corner that funnels weather into a lobby gains more from a revolving door than a sheltered street does.
Measure the floor before falling for the drum. If your building in Lanarkshire is an older one, the slab may fall toward the street, so we check levels across the full diameter and find out what lies beneath before choosing a drive.
What consents apply to revolving doors in Lanarkshire?
Shutters aren't named in Class 9A, so in Scotland they usually fall to the appearance test. The same goes for revolving doors at premises in the Lanarkshire area: building work that materially affects the external appearance needs planning permission, and a true like-for-like usually doesn't. Ask the council to confirm the position for your site.
How much do revolving doors cost in Lanarkshire?
Until the survey is done, plan on £19,995 to £59,995 plus VAT per door. Unusual sizes, fine detail and phased working push the figure up, while a simple brief and clear access keep it toward the lower end.
| Area | Lanarkshire |
|---|---|
| Nation | Scotland |
| Towns covered | 17 |
| Main town | Hamilton |
| Planning regime | Scotland: 1997 Planning Act and the 1984 Advertisement Regulations |
| Building approval | Building warrant (Technical Handbook) |
| Survey | Free for new work, from our Great Barr base |
Does North Lanarkshire Council publish shopfront guidance?
Yes, Shopfronts & Security (2011). It tells applicants what the council expects from new and altered shopfronts. A few of the things it asks for:
- Original stallrisers should be retained or reinstated, and new ones should be 450mm to 700mm high.
- Fascias should be horizontally proportioned and roughly 300mm to 450mm high.
- Demountable grilles are preferred, and externally stored roller shutters carry a high risk of refusal.
Questions about revolving doors in Lanarkshire
How much notice does a revolving door need for a site in Lanarkshire?
Allow 10 to 16 weeks after sign-off as a typical range, plus about a week on site. Starting early also gives the floor work time to finish.
Do you install revolving doors in Lanarkshire?
Yes. We travel from Great Barr to survey the entrance, and the floor, structure and door are coordinated under one contract.
Can you replace an old revolving door in Hamilton?
Often, yes. We'd measure the existing drum and floor, then advise on refurbishing or replacing it, and a like-sized drum keeps the building work down.
Do I need planning permission to alter a shopfront in the Lanarkshire area?
Usually yes, if the work materially affects the external appearance. Class 9A, Scotland's shop permitted development right, doesn't cover work that alters or extends beyond the existing front. A true like-for-like replacement usually needs no permission, and the council confirms the position.
Which way must a fire exit door open on a shop in the Lanarkshire area?
In the direction of escape. Regulation 13(2) of the Fire Safety (Scotland) Regulations 2006 also rules out sliding and revolving doors on a dedicated fire exit and says fire exit doors can't be locked against immediate use. Duties sit with dutyholders under Part 3 of the Fire (Scotland) Act 2005, meaning the employer and any person with control of the premises.