For an entrance in Cambridge that stays busy all day, the sensor set-up matters as much as the door. Done well, it opens for customers and ignores people walking past, which keeps the heat in the shop.
Bring whatever you have to the survey in Cambridge: brand guidelines, lease plans, old drawings or a photo of a frontage you admire.

How would we approach automatic sliding doors for your Cambridge premises?
A deep recess is a gift for an automatic door. At Cambridge premises with one, we'd set the door back from the street so the sensors see less of the pavement and the leaves get some shelter from the wind.
In a parade in Cambridge with a narrow pavement, the sensor set-up is the first job. We'd angle the radar so people walking past don't trigger the door, and keep the leaves in line with the neighbouring frontage.
Where the footway outside your Cambridge premises is narrow, a recessed entrance earns its keep. It gives people a dry place to pause out of the walkway, and it adds a longer run of display glass either side of the door.
What should you budget for automatic sliding doors in Cambridge?
Guide price: £3,895 to £11,995 plus VAT per entrance. Materials, finish and the amount of drawing and coordination involved all move it, and your itemised quotation shows where the money goes on automatic sliding doors.
What consents could affect automatic sliding doors in Cambridge?
For automatic sliding doors at premises in the Cambridge area, the deciding question in England is whether the building work materially affects the external appearance. If it does, planning permission is needed, while a true like-for-like replacement usually needs none. The council confirms the position for each site.
Cambridge applications for planning permission or advertisement consent are normally handled by Cambridge City Council. Our survey includes a check of the position for your address.
| Town | Cambridge |
|---|---|
| Area | Cambridgeshire |
| Postcode districts | CB1, CB2, CB4 |
| Planning authority | Cambridge City Council |
| Building approval | Building Regulations (Approved Documents) |
| Distance from Great Barr | About 89 miles |
| Survey | Free for new work |
Does Greater Cambridge publish shopfront guidance?
Yes, Appendix I: Shopfront guidance (Draft Greater Cambridge Local Plan). It tells applicants what the council expects from new and altered shopfronts. It is a draft, so check its status with the council before you rely on it. A few of the things it asks for:
- Original stallriser features should be kept and repaired unless beyond reasonable repair.
- Solid external roller shutters would only be approved if no other protection is adequate, and roller grilles need a case supported by police and insurer letters.
- Illuminated box fascias are not acceptable, and spotlights should be limited to two on most shopfronts or three on very wide ones.
Questions about automatic sliding doors in Cambridge
What do I need to arrange for a door in Cambridge?
Usually just a power supply near the head, and we'll tell you exactly what at survey. We can bring that into the one contract if you'd rather not chase an electrician.
How noisy would an automatic door be at my Cambridge shop?
A healthy door is very quiet, and you'd normally hear only a soft hum. Noise usually means worn rollers or grit in the guide, which a service will put right.
Will the door keep opening for passers-by in Cambridge?
Not if it is set up properly. We narrow the sensor field on site and test it against real footfall, so only people heading for the door trigger it.
Does a shop sign in the Cambridge area need advertisement consent?
Not always. In England, an unlit sign within Class 5 of the 2007 Advertisement Regulations generally needs no application, and neither does a lit sign within Class 4B. Anything outside those classes needs consent, and Class 4B isn't available in conservation areas, so check before ordering.
Does a new shopfront in the Cambridge area need Building Regulations approval?
Assume yes until building control says otherwise. England has no like-for-like exemption, though registered installers can self-certify replacement windows and doors in non-dwellings. That route doesn't cover structural glass, curtain walling or revolving doors.