The brief for a bi-fold is simple: an open front in summer and a warm room in winter. For March premises in Cambridgeshire, that comes down to panel count, thermal section and a threshold that drains properly.
Measuring the opening is the easy part of a survey in March. We also look at the beam above, the pavement fall and any meters or drains nearby.

How do you design around the building when planning bi-folding shopfronts in March?
Bi-folds suit a two-stage fit at March premises that trade late. We'd take the old front out and fix the frame during closed hours, then hang and adjust the panels the following night, with temporary boarding in between.
On a narrow March unit, the stack can swallow the opening. We'd limit the set to three panels, or look at a single sliding leaf, so the opening you gain outweighs the width lost to parked frames.
Where the building has good brick or stone around the opening, set the frame back in the reveal so the masonry can be seen. On March premises with a flat elevation, that deep reveal throws a shadow line that adds real depth in low sun.
What permissions should you check for bi-folding shopfronts in March?
England has no permitted development route for changing a shopfront. Part 7 Class A of the General Permitted Development Order 2015 excludes creating, altering or replacing one, and it allows no alterations at all on article 2(3) land. That leaves two outcomes for bi-folding shopfronts at premises in the March area: a planning application, or work that doesn't materially affect the external appearance.
We confirm the position at survey, because a boundary or a special designation can change who handles the file, but applications from March premises normally go to Fenland District Council.
What might bi-folding shopfronts cost in March?
Our guide band is £5,195 to £13,995 plus VAT for a typical opening. Scope is the biggest lever, so a tighter brief for bi-folding shopfronts brings the figure down faster than any change of detail.
| Town | March |
|---|---|
| Area | Cambridgeshire |
| Postcode districts | PE15 |
| Planning authority | Fenland District Council |
| Building approval | Building Regulations (Approved Documents) |
| Distance from Great Barr | About 84 miles |
| Survey | Free for new work |
Questions about bi-folding shopfronts in March
Which way should the panels fold at my March premises?
Inward is the usual answer, since panels folded into the room stay clear of people on the pavement. We'd draw the options where the room allows, and you choose against your seating plan.
How secure is a folding front in March overnight?
Very, if it is specified for the job. Each leaf locks top and bottom with concealed bolts, and laminated glass adds a second line of defence.
Who do I speak to about a bi-fold in March?
Your named contact stays the same from the first visit to the final adjustment. Fitting is carried out by vetted teams working under S&K Glazing, travelling from Great Barr.
Do roller shutters need planning permission in the March area?
Usually yes. Installing or replacing a security grill or shutter on a shopfront is expressly outside England's shop permitted development rights, so the only way to avoid an application is work that doesn't materially affect the appearance. Ask the council before ordering.
Does a new shopfront in the March area need Building Regulations approval?
Assume yes until building control says otherwise. England has no like-for-like exemption, though registered installers can self-certify replacement windows and doors in non-dwellings. That route doesn't cover structural glass, curtain walling or revolving doors.