Good shopfront design starts with the building, so the first step for any premises in Cambridgeshire is a measured visit. Everything we draw or submit after that rests on real dimensions.
Most frontages share something with someone, be that a door to the flats above, a meter cupboard or a pilaster on the boundary. We pick those up early on shopfront design in Cambridgeshire, because they are far easier to design around than to discover on the day.

Where do you start with shopfront design in Cambridgeshire?
A design can test a site before you commit. If you are considering a unit near Cambridge, a concept drawing shows what the frontage could be and roughly what it would cost.
Older buildings often hide their finest details. If your unit in Cambridgeshire has been altered, we look behind later panels at survey, as a surviving cornice or pilaster can give the design its starting point.
What consents apply to shopfront work in Cambridgeshire?
England has no permitted development route for changing a shopfront. Part 7 Class A of the General Permitted Development Order 2015 excludes creating, altering or replacing one, and it allows no alterations at all on article 2(3) land. That leaves two outcomes for shopfront work at premises in the Cambridgeshire area: a planning application, or work that doesn't materially affect the external appearance.
How much does shopfront design cost in Cambridgeshire?
Guide price: £495 to £2,495 plus VAT per frontage. Materials, finish and the amount of drawing and coordination involved all move it, and your itemised quotation shows where the money goes on shopfront design.
| Area | Cambridgeshire |
|---|---|
| Nation | England |
| Towns covered | 12 |
| Main town | Cambridge |
| Planning regime | England: TCPA 1990 and the 2007 Advertisement Regulations |
| Building approval | Building Regulations (Approved Documents) |
| Survey | Free for new work, from our Great Barr base |
Does Greater Cambridge publish shopfront guidance?
Yes, Appendix I: Shopfront guidance (Draft Greater Cambridge Local Plan). It tells applicants what the council expects from new and altered shopfronts. It is a draft, so check its status with the council before you rely on it. A few of the things it asks for:
- Original stallriser features should be kept and repaired unless beyond reasonable repair.
- Solid external roller shutters would only be approved if no other protection is adequate, and roller grilles need a case supported by police and insurer letters.
- Illuminated box fascias are not acceptable, and spotlights should be limited to two on most shopfronts or three on very wide ones.
Questions about shopfront design in Cambridgeshire
Can the design cover a sign and lighting too?
Yes, and it should. The sign, lamps and interior light all affect the frontage, so we draw them together for premises around Cambridge and everywhere else we work.
Can you draw my premises in Cambridgeshire before I commit to the lease?
Yes. A survey and concept drawing can show what the frontage could become and give a budget for it, which is useful while terms are still open.
Can you design around an existing shopfront near Cambridge?
Yes. If the frame is sound, the design may keep it and change the glass, fascia, stallriser or colour. We would show that next to a full replacement, so you can compare cost and result.
Does the Equality Act apply to a shop entrance in the Cambridgeshire area?
Yes. The Equality Act 2010 applies in England, as across Great Britain, and it requires reasonable steps to remove, alter or avoid physical features that disadvantage disabled people. The duty is anticipatory, so it looks at disabled people generally, and a new Services Code replaced the 2011 Code on 5 August 2026.
Do I need listed building consent for a shopfront in the Cambridgeshire area?
Usually yes, if the building is listed. In England the local planning authority decides, and Historic England is notified of Grade I and II* works and specified Grade II works. Like-for-like repair may not need consent, so ask the council before work starts.