0800 088 6248 Get a guide price
  1. Home
  2. Services
  3. Aluminium shopfronts
  4. Cambridgeshire

Aluminium shopfronts in Cambridgeshire

A measured survey and scale drawings for premises in Cambridgeshire.

From Cambridge to the furthest corner of Cambridgeshire, the sequence for aluminium shopfronts stays the same: survey, drawings, written price, then work on site. We travel from Great Barr in Birmingham and use vetted teams working under S&K Glazing.

Daylight is only half the brief for aluminium shopfronts, because a frontage keeps working after dark. Think about how the glass, the sign and the view inside will read to someone walking past at six o'clock on a winter evening.

Dark bronze aluminium shopfront with slim frames, a low stallriser and a glazed entrance door

What should you settle before committing to aluminium shopfronts in Cambridgeshire?

Large panes set the logistics for any aluminium front in Cambridgeshire. We look at where a glass vehicle can stop, how far the panes must be carried and whether a lifting aid will fit, because a 3m sheet that can't reach the opening on the day is a wasted trip.

A unit in Cambridge may only be able to close overnight, while a shop on a quieter street might prefer a midweek closed day. We plan the strip-out around your takings, and the fitting sequence follows from that.

What consents apply to aluminium shopfronts in Cambridgeshire?

A true like-for-like replacement usually needs no planning permission in England, because the external appearance isn't materially affected. New materials, a different glass line or altered proportions usually do count as material, so for aluminium shopfronts at premises in the Cambridgeshire area, an application is then likely. The council confirms which side of that line a job falls on.

How much do aluminium shopfronts cost in Cambridgeshire?

A sensible starting budget is £2,495 to £11,995 plus VAT for a typical 3 to 7 m frontage. What shifts the figure is whatever can't be seen yet, such as the condition behind the old frontage or the services running through it.

Cambridgeshire at a glance
AreaCambridgeshire
NationEngland
Towns covered12
Main townCambridge
Planning regimeEngland: TCPA 1990 and the 2007 Advertisement Regulations
Building approvalBuilding Regulations (Approved Documents)
SurveyFree for new work, from our Great Barr base

Does Greater Cambridge publish shopfront guidance?

Yes, Appendix I: Shopfront guidance (Draft Greater Cambridge Local Plan). It tells applicants what the council expects from new and altered shopfronts. It is a draft, so check its status with the council before you rely on it. A few of the things it asks for:

  • Original stallriser features should be kept and repaired unless beyond reasonable repair.
  • Solid external roller shutters would only be approved if no other protection is adequate, and roller grilles need a case supported by police and insurer letters.
  • Illuminated box fascias are not acceptable, and spotlights should be limited to two on most shopfronts or three on very wide ones.

Read our summary of the Greater Cambridge guidance

Questions about aluminium shopfronts in Cambridgeshire

How long would an aluminium shopfront take in Cambridgeshire?

Typically 2 to 4 weeks to fabricate once drawings are signed off, then 1 to 5 days on site. The programme depends on the opening rather than the postcode, so it is set after the measured survey.

Can you match other units we run in Cambridgeshire?

Yes, if we can see what is already there. We record the section, colour and stallriser detail from your existing front, then draw the new unit to sit with it.

Can premises in Cambridge be fitted outside trading hours?

Usually, yes. Closed-day or out-of-hours installation can be arranged, and the noisy strip-out is planned first so the rest of the work disturbs neighbours less.

Do roller shutters need planning permission in the Cambridgeshire area?

Usually yes. Installing or replacing a security grill or shutter on a shopfront is expressly outside England's shop permitted development rights, so the only way to avoid an application is work that doesn't materially affect the appearance. Ask the council before ordering.

Does the Equality Act apply to a shop entrance in the Cambridgeshire area?

Yes. The Equality Act 2010 applies in England, as across Great Britain, and it requires reasonable steps to remove, alter or avoid physical features that disadvantage disabled people. The duty is anticipatory, so it looks at disabled people generally, and a new Services Code replaced the 2011 Code on 5 August 2026.

Planning aluminium shopfronts in Cambridgeshire?

Send the address and a photo, and we'll come and measure it.

Call usGet a guide price