For multi-site rollouts across Cambridgeshire, we draw first and order later. You see a scale drawing with signed-off dimensions before anything is made, so the frontage on paper is the frontage you get.
Openings are rarely square or level, so the survey for multi-site rollouts records diagonals, pavement fall and head height at several points. Those few millimetres decide whether the finished front sits true against the building.

What makes multi-site rollouts work well for premises in Cambridgeshire?
Units in the same chain can differ widely. A shopping centre unit and a street-front unit in Cambridgeshire need different details, so the kit of parts would give each its own route.
Grouping sites cuts repeat travel. If several of your premises sit in Cambridgeshire, we would batch surveys and fitting around Cambridge, so one crew moves from site to site.
What consents apply to multi-site rollouts in Cambridgeshire?
England has no permitted development route for changing a shopfront. Part 7 Class A of the General Permitted Development Order 2015 excludes creating, altering or replacing one, and it allows no alterations at all on article 2(3) land. That leaves two outcomes for multi-site rollouts at premises in the Cambridgeshire area: a planning application, or work that doesn't materially affect the external appearance.
| Area | Cambridgeshire |
|---|---|
| Nation | England |
| Towns covered | 12 |
| Main town | Cambridge |
| Planning regime | England: TCPA 1990 and the 2007 Advertisement Regulations |
| Building approval | Building Regulations (Approved Documents) |
| Survey | Free for new work, from our Great Barr base |
Does Greater Cambridge publish shopfront guidance?
Yes, Appendix I: Shopfront guidance (Draft Greater Cambridge Local Plan). It tells applicants what the council expects from new and altered shopfronts. It is a draft, so check its status with the council before you rely on it. A few of the things it asks for:
- Original stallriser features should be kept and repaired unless beyond reasonable repair.
- Solid external roller shutters would only be approved if no other protection is adequate, and roller grilles need a case supported by police and insurer letters.
- Illuminated box fascias are not acceptable, and spotlights should be limited to two on most shopfronts or three on very wide ones.
Questions about multi-site rollouts in Cambridgeshire
How would work on premises in Cambridgeshire fit around trading?
Fit dates would be set site by site, with closed-day or out-of-hours installation where needed. We would share the plan with each manager before the crew arrives.
Would one person manage all my sites around Cambridge?
Yes, you would have one named contact for the programme. Vetted teams working under S&K Glazing would carry out the work, with each site following the same drawings and checks.
How would site surveys in Cambridgeshire be arranged?
We would agree a route and dates with you, then visit each sample site at a time that suits the manager. A survey usually takes a couple of hours and needs little from the staff on site.
Does the Equality Act apply to a shop entrance in the Cambridgeshire area?
Yes. The Equality Act 2010 applies in England, as across Great Britain, and it requires reasonable steps to remove, alter or avoid physical features that disadvantage disabled people. The duty is anticipatory, so it looks at disabled people generally, and a new Services Code replaced the 2011 Code on 5 August 2026.
Does a new shopfront in the Cambridgeshire area need Building Regulations approval?
Assume yes until building control says otherwise. England has no like-for-like exemption, though registered installers can self-certify replacement windows and doors in non-dwellings. That route doesn't cover structural glass, curtain walling or revolving doors.