0800 088 6248 Get a guide price
  1. Home
  2. Areas
  3. Highlands and Moray

Shopfronts in the Highlands and Moray

One named contact for your frontage, wherever you are in the Highlands and Moray.

A shopfront you admire is the right place to start, and we work with premises across the Highlands and Moray to get yours looking that good. Proportion can't be judged from a photograph, so the first step is a visit and a measure-up.

Good frontages are won in small dimensions. A stallriser a little too low, a fascia a little too deep or a glazing bar in the wrong place can unsettle a whole elevation, so our drawings for the Highlands and Moray jobs show those details before anything is cut.

A bespoke shopfront of the kind we design for the Highlands and Moray

What consents apply to shopfronts in the Highlands and Moray?

Class 9A, Scotland's shop permitted development right, gives no route for a shopfront change. It covers Class 1A premises, but not work that alters or extends beyond the existing front, and it doesn't apply in conservation areas, National Parks or World Heritage Sites. For shopfront work at premises in the Highlands and Moray area, that generally means a planning application unless the external appearance isn't materially affected.

Class VI is the class for lit signs in Scotland, and it is tightly drawn: each character lit from within, the sign at least 2.5m up, no more than 0.25m of projection, and static lighting. One Scottish council says illuminated signs always need express consent, which doesn't match Class VI, so ask the council for the Highlands and Moray area before ordering.

Which rules apply to buildings in the Highlands and Moray?

Historic Environment Scotland says window and door changes almost certainly need listed building consent, so expect the same on a listed frontage in the Highlands and Moray area. It also publishes Managing Change: Shopfronts and Signs, which is worth reading before drawings start. The decision itself rests with the planning authority.

Scotland's Technical Handbook sets the entrance detail for premises in the Highlands and Moray area: a level threshold, or 15mm at most with upstands over 5mm chamfered, a 1500mm by 1500mm landing, and 800mm clear door width. Escape doors open in the direction of escape unless occupancy is 60 or fewer, and revolving or automatic doors need BS 7036 design and fail-safe conditions. The 2022 edition is the source here, so confirm against the April 2026 Handbook.

Highlands and Moray at a glance
AreaHighlands and Moray
NationScotland
Towns covered5
Main townInverness
Planning regimeScotland: 1997 Planning Act and the 1984 Advertisement Regulations
Building approvalBuilding warrant (Technical Handbook)

Does The Highland Council publish shopfront guidance?

Yes, Shopfront Design Guide: Planning Guidance (2018). It tells applicants what the council expects from new and altered shopfronts. A few of the things it asks for:

  • Stallrisers should be at least 400mm high, and glazing to ground level is generally not acceptable on traditional shopfronts.
  • Fascias must not be internally lit or span more than one building, and lettering should fill no more than two-thirds of the fascia.
  • Solid shutters are not supported, and external retractable shuttering is unlikely to be acceptable in conservation areas or on listed buildings.

Read our summary of the Highland guidance

What can we fit in the Highlands and Moray?

Questions about shopfronts in the Highlands and Moray

Can a tenant in the Highlands and Moray commission a new shopfront?

Yes, tenants can commission us directly. Your landlord will probably want to see the proposal first, so our scale drawings are prepared to be passed on.

Who is the contract with for work in the Highlands and Moray?

S&K Glazing Limited, company number 14088194, which trades as Shopfront Specialists. That company stands behind the work wherever it is carried out, including every job in the Highlands and Moray.

Can you match an existing frontage in the Highlands and Moray?

Usually, yes. Colours, profiles and proportions can all be matched closely once we have measured them, although an aged finish rarely matches a new one on day one, so we show you samples first.

Does the Equality Act cover a shop entrance in the Highlands and Moray area?

Yes. The Equality Act 2010 applies in Scotland as part of Great Britain, and its anticipatory duty expects reasonable steps to remove, alter or avoid physical features that disadvantage disabled people generally. BS 8300-2:2018 is the current British Standard for accessible buildings.

Do I need a building warrant for a shopfront in the Highlands and Moray area?

Usually yes in Scotland, if the work alters a wall or structure. Schedule 3 of the Building (Scotland) Regulations 2004 lists some work that needs no warrant, such as replacing a door or window with its frame, but the standards still apply. Shopfronts aren't named there, so ask the council before relying on it.

Do I need planning permission to alter a shopfront in the Highlands and Moray area?

Usually yes, if the work materially affects the external appearance. Class 9A, Scotland's shop permitted development right, doesn't cover work that alters or extends beyond the existing front. A true like-for-like replacement usually needs no permission, and the council confirms the position.

Towns we cover in the Highlands and Moray

Got premises in the Highlands and Moray?

Send the address and a photo, and we'll arrange a survey.

Call usGet a guide price